| MRC |
Requirement Statement |
Characteristics |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AASB |
FASTENER LENGTH |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.073 INCHES MINIMUM AND 0.083 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.202 INCHES MINIMUM AND 0.222 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
PAN NO. 2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-7720 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 301 OVERALL OR STEEL COMP 302 OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.112 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| SFTT |
SURFACE TREATMENT |
PAINT OVERALL AND PRIMER OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
40 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
