| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
40.0 ROCKWELL C MINIMUM PRIMARY WASHER AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER |
| AASL |
HEAD DIAMETER |
0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
ROUND |
| MATT |
MATERIAL |
STEEL COMP 1010 FASTENER OR STEEL COMP 1011 FASTENER OR STEEL COMP 1013 FASTENER OR STEEL COMP 1015 FASTENER OR STEEL COMP 1016 FASTENER OR STEEL COMP 1017 FASTENER OR STEEL COMP 1018 FASTENER OR STEEL COMP 1019 FASTENER OR STEEL COMP 1020 FASTENER |
| MATT |
MATERIAL |
STEEL COMP 1050 PRIMARY WASHER OR STEEL COMP 1551 PRIMARY WASHER OR STEEL COMP 1552 PRIMARY WASHER OR STEEL COMP 1053 PRIMARY WASHER OR STEEL COMP 1054 PRIMARY WASHER OR STEEL COMP 1055 PRIMARY WASHER OR STEEL COMP 1059 PRIMARY WASHER OR STEEL COMP 1060 P |
| AHYM |
NOMINAL THREAD DIAMETER |
0.164 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| CTJJ |
PRIMARY WASHER MATERIAL THICKNESS |
0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM |
| CSPG |
PRIMARY WASHER OUTSIDE DIAMETER |
0.305 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| CTHW |
PRIMARY WASHER STYLE |
FLAT EXTERNAL TEETH |
| AAVW |
WASHER QUANTITY |
1 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL OR ZINC OVERALL |
| AASA |
THREAD LENGTH |
0.196 INCHES MINIMUM AND 0.294 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
