| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
1.035 INCHES MINIMUM AND 1.065 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASL |
HEAD DIAMETER |
0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
PAN NO. 2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE FASTENER OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE FASTENER OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE FASTENER |
| MATT |
MATERIAL |
PLASTIC LOCKING FEATURE |
| MATT |
MATERIAL |
STEEL COMP 4140 FASTENER OR STEEL COMP E4340 FASTENER OR STEEL COMP 8740 FASTENER |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AAUM |
LOCKING FEATURE |
PATCH THREADS OR PELLET THREADS OR STRIP THREADS |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80502-NAS1184 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| SFTT |
SURFACE TREATMENT |
CADMIUM FASTENER AND CHROMATE FASTENER |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
