| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
0.551 INCHES MINIMUM AND 0.581 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE O |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
