| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| AES01F312A00AW9A91 | AMERICAN SOCIETY OF MECHANICAL | 5047 | 3 | 2 | 1 | ||||
| 186724 | AMERICAN SOCIETY OF MECHANICAL | 21450 | 5 | 1 | 1 | ||||
| ASEM B18.2.1 | AMERICAN SOCIETY OF MECHANICAL | 5047 | 5 | 1 | 1 | ||||
| 199-110 | AMERICAN SOCIETY OF MECHANICAL | 8081 | C | 1 | 1 | AB | |||
| 199-110 | AMERICAN SOCIETY OF MECHANICAL | 72741 | C | 1 | 1 | AB | |||
| XX002-0970 | AMERICAN SOCIETY OF MECHANICAL | H2229 | 5 | 9 | 1 | ||||
| MS35304-34 | AMERICAN SOCIETY OF MECHANICAL | 96906 | 5 | 9 | 1 | ||||
| 18C516 | AMERICAN SOCIETY OF MECHANICAL | 12603 | 5 | 9 | 1 | ||||
| BACS12CG34 | AMERICAN SOCIETY OF MECHANICAL | 81205 | 5 | 9 | 1 | ||||
| 5305000514076 | AMERICAN SOCIETY OF MECHANICAL | SCY13 | 5 | 9 | 1 | ||||
| B1821BH031F100N | AMERICAN SOCIETY OF MECHANICAL | 80204 | 5 | 9 | 1 | ||||
| FF-S-85 | AMERICAN SOCIETY OF MECHANICAL | 81348 | 5 | 9 | 1 | ||||
| MS90727-34 | AMERICAN SOCIETY OF MECHANICAL | 96906 | 5 | 9 | 1 | ||||
| 5305PL0818697 | AMERICAN SOCIETY OF MECHANICAL | 9009H | 6 | 9 | 1 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| AASB | FASTENER LENGTH | 1.000 INCHES NOMINAL |
| CQFM | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM OVERALL AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| AASU | HEAD HEIGHT | 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM |
| AASK | HEAD STYLE | HEXAGON |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE J429 GR8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | STEEL OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 10P STYLE AND 8 GRADE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AATB | WIDTH BETWEEN FLATS | 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ZINC OVERALL AND CHROMATE OVERALL |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.875 INCHES MINIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
