| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASB |
FASTENER LENGTH |
1.187 INCHES MINIMUM AND 1.234 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASL |
HEAD DIAMETER |
0.555 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
NAVY SPECIAL PROJECT |
| ABQZ |
INTERNAL DRIVE STYLE |
HIGH-TORQUE |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES GRIP |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES THREADS |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.365 INCHES MINIMUM AND 0.432 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
