| MRC |
Requirement Statement |
Characteristics |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
1.930 INCHES MINIMUM AND 1.950 INCHES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AASB |
FASTENER LENGTH |
2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FILLISTER |
| CRHC |
HOLE CONFIGURATION STYLE |
ROUND |
| AAUB |
HOLE DIAMETER |
0.062 INCHES NOMINAL |
| ASXK |
HOLE QUANTITY |
1 |
| BQDM |
HOLE TYPE |
DRILLED |
| MATT |
MATERIAL |
STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6320 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.264 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.560 INCHES MINIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
