| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.128 INCHES NOMINAL ALL HOLES |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.800 INCHES MINIMUM AND 0.830 INCHES MAXIMUM |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
1.300 INCHES MINIMUM AND 1.330 INCHES MAXIMUM |
| AAWK |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER |
1.670 INCHES MINIMUM AND 1.700 INCHES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
3 |
| AASB |
FASTENER LENGTH |
2.188 INCHES NOMINAL |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.535 INCHES MINIMUM AND 0.545 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
1.182 INCHES MINIMUM AND 1.192 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
PAN NO. 2 |
| MATT |
MATERIAL |
STEEL COMP 8740 OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.625 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.686 INCHES MINIMUM AND 0.687 INCHES MAXIMUM |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
2.047 INCHES NOMINAL FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| SFTT |
SURFACE TREATMENT |
TIN OVERALL |
| AAWE |
THIRD DIAMETER FROM HEAD |
0.535 INCHES MINIMUM AND 0.545 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.488 INCHES MINIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
