| MRC |
Requirement Statement |
Characteristics |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.247 INCHES MINIMUM AND 0.308 INCHES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AASB |
FASTENER LENGTH |
0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.060 INCHES NOMINAL |
| AASL |
HEAD DIAMETER |
0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
PAN NO. 2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OVERALL OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 301 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 302B OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 303F OVERALL OR STEEL COMP 303 PLUS X OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.086 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
C190000120,FSC-88818 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AASA |
THREAD LENGTH |
0.130 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
56 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
