| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| C623-3-3 | LOCKHEED MARTIN CORPORATION | 81755 | 3 | 2 | 2 | ||||
| C623-3-3 | LOCKHEED MARTIN CORPORATION | 6725 | 5 | 2 | 2 | ||||
| C623-3-3 | LOCKHEED MARTIN CORPORATION | 6950 | 5 | 2 | 2 | ||||
| C623-3-3 | LOCKHEED MARTIN CORPORATION | 56878 | 5 | 2 | 2 | ||||
| C623-3-3 | LOCKHEED MARTIN CORPORATION | 73197 | 5 | 2 | 2 | ||||
| C623-3-3 | LOCKHEED MARTIN CORPORATION | 93907 | 5 | 2 | 2 | ||||
| C623-3-3 | LOCKHEED MARTIN CORPORATION | 92215 | 5 | 2 | 2 | ||||
| C623-3-3 | LOCKHEED MARTIN CORPORATION | L4528 | 5 | 2 | 2 | ||||
| AIC1024-3-3 | LOCKHEED MARTIN CORPORATION | 6725 | 5 | 9 | 2 | ||||
| 652478-3-3 | LOCKHEED MARTIN CORPORATION | 56878 | 5 | 9 | 2 | ||||
| HR102-3-3 | LOCKHEED MARTIN CORPORATION | 73197 | 5 | 9 | 2 | ||||
| VT1043-3-3 | LOCKHEED MARTIN CORPORATION | 92215 | 5 | 9 | 2 | ||||
| CS92641-3-3 | LOCKHEED MARTIN CORPORATION | 93907 | 5 | 9 | 2 | ||||
| BM623-3-3 | LOCKHEED MARTIN CORPORATION | 97928 | 5 | 9 | 2 | ||||
| C623-3-3 | LOCKHEED MARTIN CORPORATION | 97928 | 5 | 9 | 2 | ||||
| AIC1024V3-3 | LOCKHEED MARTIN CORPORATION | 6725 | 5 | 9 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| AASB | FASTENER LENGTH | 0.510 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.377 INCHES MINIMUM AND 0.384 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.058 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NAS621,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | TITANIUM ALLOY UNS R54520 OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| AHYM | NOMINAL THREAD DIAMETER | 0.192 INCHES |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| AASA | THREAD LENGTH | 0.250 INCHES MINIMUM AND 0.362 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 32 |
