| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| BM19019-4-7 | HUCK INTERNATIONAL, INC. | 17446 | 3 | 2 | 2 | ||||
| HT295-4-7 | HUCK INTERNATIONAL, INC. | C4293 | 5 | 2 | 2 | ||||
| HT8140-4-7 | HUCK INTERNATIONAL, INC. | C4293 | 5 | 2 | 2 | ||||
| HT8140-4-7 | HUCK INTERNATIONAL, INC. | 6950 | 5 | 2 | 2 | ||||
| ST3M454-4-7 | HUCK INTERNATIONAL, INC. | 60516 | 5 | 2 | 2 | ||||
| ST3M454-4-7 | HUCK INTERNATIONAL, INC. | 58998 | 5 | 2 | 2 | ||||
| 11905-4-7 | HUCK INTERNATIONAL, INC. | 59563 | 5 | 2 | 2 | ||||
| HT295-4-7 | HUCK INTERNATIONAL, INC. | 73197 | 5 | 2 | 2 | ||||
| ST3M454-4-7 | HUCK INTERNATIONAL, INC. | 80539 | 5 | 2 | 2 | ||||
| HT295-4-7 | HUCK INTERNATIONAL, INC. | L4528 | 5 | 2 | 2 | ||||
| HT295-4-7 | HUCK INTERNATIONAL, INC. | R1120 | 5 | 2 | 2 | ||||
| ST3M454-4-7 | HUCK INTERNATIONAL, INC. | 0PTK6 | 5 | 9 | 2 | ||||
| 106830-4-7 | HUCK INTERNATIONAL, INC. | 50394 | 5 | 9 | 2 | ||||
| HT8140-4-7 | HUCK INTERNATIONAL, INC. | 92215 | 5 | 9 | 2 | ||||
| BM19019-4-7 | HUCK INTERNATIONAL, INC. | 97928 | 5 | 9 | 2 | ||||
| ST3M454-4-7 | HUCK INTERNATIONAL, INC. | 76301 | D | 9 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| AASB | FASTENER LENGTH | 0.819 INCHES MINIMUM AND 0.866 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.371 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
