| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
0.500 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
40.0 ROCKWELL C MINIMUM PRIMARY WASHER AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER |
| AASU |
HEAD HEIGHT |
0.162 INCHES MINIMUM AND 0.178 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.594 INCHES MINIMUM AND 0.615 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
PAN NO. 2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE ASSN STD ALL MATERIAL RESPONSES FASTENER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE ASSN STD ALL MATERIAL RESPONSES PRIMARY WASHER |
| MATT |
MATERIAL |
STEEL COMP 1010 FASTENER OR STEEL COMP 1011 FASTENER OR STEEL COMP 1013 FASTENER OR STEEL COMP 1015 FASTENER OR STEEL COMP 1016 FASTENER OR STEEL COMP 1017 FASTENER OR STEEL COMP 1018 FASTENER OR STEEL COMP 1019 FASTENER OR STEEL COMP 1020 FASTENER |
| MATT |
MATERIAL |
STEEL COMP 1050 PRIMARY WASHER OR STEEL COMP 1551 PRIMARY WASHER OR STEEL COMP 1552 PRIMARY WASHER OR STEEL COMP 1053 PRIMARY WASHER OR STEEL COMP 1054 PRIMARY WASHER OR STEEL COMP 1055 PRIMARY WASHER OR STEEL COMP 1059 PRIMARY WASHER OR STEEL COMP 1060 P |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| CTJJ |
PRIMARY WASHER MATERIAL THICKNESS |
0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
| CSPG |
PRIMARY WASHER OUTSIDE DIAMETER |
0.588 INCHES MINIMUM AND 0.610 INCHES MAXIMUM |
| CTHW |
PRIMARY WASHER STYLE |
FLAT EXTERNAL TEETH |
| AAVW |
WASHER QUANTITY |
1 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL OR ZINC OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.324 INCHES MINIMUM AND 0.472 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
