| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.822 INCHES MINIMUM FIRST HOLE AND 0.872 INCHES MAXIMUM FIRST HOLE |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| AASB |
FASTENER LENGTH |
0.949 INCHES MINIMUM AND 0.979 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
NAS621,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R54520 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.060 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| AASA |
THREAD LENGTH |
0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
