| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.272 INCHES MINIMUM FIRST HOLE AND 1.354 INCHES MAXIMUM FIRST HOLE |
| AASB |
FASTENER LENGTH |
1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
235.0 ROCKWELL B MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| MATT |
MATERIAL |
STEEL COMP 403 OVERALL OR STEEL COMP 405 OVERALL OR STEEL COMP 410 OVERALL OR STEEL COMP 414 OVERALL OR STEEL COMP 416 OVERALL OR STEEL COMP 416SE OVERALL OR STEEL COMP 420 OVERALL OR STEEL COMP 420F OVERALL OR STEEL COMP 430 OVERALL OR STEEL COMP 430F OV |
| CQBC |
MINIMUM TENSILE STRENGTH |
70000 POUNDS PER SQUARE INCH |
| CQHQ |
MINIMUM YIELD STRENGTH |
40000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.105 INCHES MINIMUM FIRST HOLE AND 0.113 INCHES MAXIMUM FIRST HOLE |
| AATB |
WIDTH BETWEEN FLATS |
0.551 INCHES MINIMUM AND 0.563 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
1.188 INCHES MINIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
