| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| NAS1122E3H | NATIONAL AEROSPACE STANDARDS | 80205 | 3 | 2 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 80205 | 3 | 9 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 4348 | 5 | 9 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 7851 | 5 | 9 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 8938 | 5 | 9 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 30485 | 5 | 9 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 30902 | 5 | 9 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 50568 | 5 | 9 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 56878 | 5 | 9 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 58998 | 5 | 9 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 53606 | 5 | 9 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 80539 | 5 | 9 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 73197 | 5 | 9 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 92215 | 5 | 9 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 97928 | 5 | 9 | 5 | ||||
| NAS1122C3H | NATIONAL AEROSPACE STANDARDS | 17446 | 5 | 9 | 5 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| AASB | FASTENER LENGTH | 0.449 INCHES MINIMUM AND 0.479 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM |
| AASK | HEAD STYLE | FILLISTER |
| AAUB | HOLE DIAMETER | 0.038 INCHES NOMINAL |
| ASXK | HOLE QUANTITY | 2 |
| BQDM | HOLE TYPE | DRILLED |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1122 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASA | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 32 |
