| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.231 INCHES MINIMUM FIRST HOLE AND 1.281 INCHES MAXIMUM FIRST HOLE |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASB |
FASTENER LENGTH |
1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASL |
HEAD DIAMETER |
0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
HIGH-TORQUE |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
