| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.899 INCHES MINIMUM FIRST HOLE AND 0.949 INCHES MAXIMUM FIRST HOLE |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASB |
FASTENER LENGTH |
1.079 INCHES MINIMUM AND 1.109 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
OVAL COUNTERSUNK |
| MATT |
MATERIAL |
TITANIUM ALLOY OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
HIGH-TORQUE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES MINIMUM FIRST HOLE AND 0.081 INCHES MAXIMUM FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
