| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| HT4025L4-13 | SPS TECHNOLOGIES, LLC | 80539 | 3 | 2 | 2 | ||||
| HT4025L4-13 | SPS TECHNOLOGIES, LLC | 6950 | 3 | 2 | 2 | ||||
| ST3M454-4L-13 | SPS TECHNOLOGIES, LLC | 58998 | 3 | 2 | 2 | ||||
| WC4025L-4-13 | SPS TECHNOLOGIES, LLC | 60516 | 3 | 2 | 2 | ||||
| HT4025L4-13 | SPS TECHNOLOGIES, LLC | 73197 | 3 | 2 | 2 | ||||
| HT4025L4-13 | SPS TECHNOLOGIES, LLC | L4528 | 3 | 2 | 2 | ||||
| HT4025L4-13 | SPS TECHNOLOGIES, LLC | C4293 | 5 | 2 | 2 | ||||
| 11905-4L13 | SPS TECHNOLOGIES, LLC | 59563 | 5 | 2 | 2 | ||||
| ST3M454-4L13 | SPS TECHNOLOGIES, LLC | 92215 | 5 | 2 | 2 | ||||
| ST3M454-4L13 | SPS TECHNOLOGIES, LLC | K5673 | 5 | 2 | 2 | ||||
| HT4025L4-13 | SPS TECHNOLOGIES, LLC | R1120 | 5 | 2 | 2 | ||||
| HT4025L4-13 | SPS TECHNOLOGIES, LLC | 17446 | 7 | 2 | 2 | ||||
| ST3M454-4L13 | SPS TECHNOLOGIES, LLC | 76301 | 7 | 2 | 2 | ||||
| HT4025L4-13 | SPS TECHNOLOGIES, LLC | 56878 | 5 | 9 | 2 | ||||
| HT4025L4-13 | SPS TECHNOLOGIES, LLC | 97928 | 5 | 9 | 2 | ||||
| HT4025L4-13 | SPS TECHNOLOGIES, LLC | 92215 | 5 | 9 | 2 | ||||
| HT4025L4-13 | SPS TECHNOLOGIES, LLC | 0PTK6 | 5 | 9 | 2 | ||||
| 10125381 | SPS TECHNOLOGIES, LLC | A486G | 6 | 9 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASB | FASTENER LENGTH | 1.266 INCHES MINIMUM AND 1.296 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ZZZK | SPECIFICATION/STANDARD DATA | 76301-ST3-45 MANUFACTURERS STANDARD |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
