| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| AASB |
FASTENER LENGTH |
0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
28.0 ROCKWELL C MINIMUM OVERALL AND 34.0 ROCKWELL C MAXIMUM OVERALL |
| AASL |
HEAD DIAMETER |
0.275 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| MATT |
MATERIAL |
STEEL COMP 1022 OVERALL OR STEEL COMP 1050 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.164 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| CTJJ |
PRIMARY WASHER MATERIAL THICKNESS |
0.017 INCHES NOMINAL |
| CSPG |
PRIMARY WASHER OUTSIDE DIAMETER |
0.645 INCHES MINIMUM AND 0.665 INCHES MAXIMUM |
| CTHW |
PRIMARY WASHER STYLE |
DOME INTERNAL TEETH |
| CWBW |
SECONDARY WASHER MATERIAL THICKNESS |
0.017 INCHES NOMINAL |
| AAVW |
WASHER QUANTITY |
1 |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.296 INCHES MINIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
