| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
0.280 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.078 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
PAN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-7720 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-18732 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5059 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-5059 MIL SPEC 5TH MATERIAL RESPONSE OV |
| MATT |
MATERIAL |
STEEL COMP 430 OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 301 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 316 OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.112 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| CTJJ |
PRIMARY WASHER MATERIAL THICKNESS |
0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM |
| CSPG |
PRIMARY WASHER OUTSIDE DIAMETER |
0.212 INCHES MAXIMUM |
| CTHW |
PRIMARY WASHER STYLE |
SPLIT HELICAL RING |
| CWBW |
SECONDARY WASHER MATERIAL THICKNESS |
0.013 INCHES MINIMUM |
| CTDQ |
SECONDARY WASHER OUTSIDE DIAMETER |
0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| CRGX |
SECONDARY WASHER RELATIONSHIP TO PRIMARY WASHER |
NOT IDENTICAL |
| CRYT |
SECONDARY WASHER STYLE |
FLAT |
| AAVW |
WASHER QUANTITY |
2 |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AASA |
THREAD LENGTH |
0.231 INCHES MINIMUM |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
40 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
