| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
25.0 ROCKWELL C MINIMUM OVERALL AND 34.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| AAUB |
HOLE DIAMETER |
0.060 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
1 |
| BQDM |
HOLE TYPE |
DRILLED |
| MATT |
MATERIAL |
STEEL COMP 1013 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1016 OVERALL OR STEEL COMP 1017 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1019 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1021 OVERALL OR STEEL COMP 1022 OVERALL OR STEEL COMP 1 |
| CQBC |
MINIMUM TENSILE STRENGTH |
120000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.438 INCHES |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE AND 5 GRADE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AATB |
WIDTH BETWEEN FLATS |
0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.844 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
