| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.725 INCHES MINIMUM FIRST HOLE AND 0.776 INCHES MAXIMUM FIRST HOLE |
| AASB |
FASTENER LENGTH |
0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
235.0 BRINELL STANDARD MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| MATT |
MATERIAL |
STEEL COMP 403 OVERALL OR STEEL COMP 405 OVERALL OR STEEL COMP 410 OVERALL OR STEEL COMP 414 OVERALL OR STEEL COMP 416 OVERALL OR STEEL COMP 416SE OVERALL OR STEEL COMP 420 OVERALL OR STEEL COMP 430 OVERALL OR STEEL COMP 431 OVERALL OR STEEL COMP 440A OVE |
| CQBC |
MINIMUM TENSILE STRENGTH |
70000 POUNDS PER SQUARE INCH |
| CQHQ |
MINIMUM YIELD STRENGTH |
40000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.074 INCHES MINIMUM FIRST HOLE AND 0.082 INCHES MAXIMUM FIRST HOLE |
| AATB |
WIDTH BETWEEN FLATS |
0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.875 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
