| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| AES01C375875AW9A97 | AMERICAN SOCIETY OF MECHANICAL | 5047 | 3 | 2 | 1 | ||||
| 69183 | AMERICAN SOCIETY OF MECHANICAL | 13841 | 5 | 1 | 1 | ||||
| ASME B18.2.1 | AMERICAN SOCIETY OF MECHANICAL | 5047 | 5 | 1 | 1 | ||||
| MS35295-59 | AMERICAN SOCIETY OF MECHANICAL | 96906 | C | 1 | 1 | AA | |||
| 409221 | AMERICAN SOCIETY OF MECHANICAL | 5448 | C | 1 | 1 | AA | |||
| 180121 | AMERICAN SOCIETY OF MECHANICAL | 80195 | C | 1 | 1 | AA | |||
| 180121 | AMERICAN SOCIETY OF MECHANICAL | D9182 | C | 1 | 1 | AC | |||
| 75A130 | AMERICAN SOCIETY OF MECHANICAL | D9182 | C | 1 | 1 | AC | |||
| MS51491-021 | AMERICAN SOCIETY OF MECHANICAL | 96906 | C | 1 | 1 | AC | |||
| 5305005584181 | AMERICAN SOCIETY OF MECHANICAL | SCY13 | 5 | 9 | 1 | ||||
| B1821BH038C088D | AMERICAN SOCIETY OF MECHANICAL | 80204 | 5 | 9 | 1 | ||||
| FF-S-85 | AMERICAN SOCIETY OF MECHANICAL | 81348 | 5 | 9 | 1 | ||||
| MS18154-59 | AMERICAN SOCIETY OF MECHANICAL | 96906 | 5 | 9 | 1 | ||||
| 10082694 | AMERICAN SOCIETY OF MECHANICAL | A486G | 6 | 9 | 1 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| AASB | FASTENER LENGTH | 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| AASU | HEAD HEIGHT | 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM |
| AASK | HEAD STYLE | HEXAGON |
| CRHC | HOLE CONFIGURATION STYLE | HEXAGON FLATS |
| AAUB | HOLE DIAMETER | 0.020 INCHES NOMINAL |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | STEEL OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 10P STYLE |
| AATB | WIDTH BETWEEN FLATS | 0.551 INCHES MINIMUM AND 0.563 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ZINC OVERALL AND CHROMATE OVERALL |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.875 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| THSD | THREAD SERIES DESIGNATOR | UNC |
