| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| AAUB |
HOLE DIAMETER |
0.094 INCHES NOMINAL |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| ASXK |
HOLE QUANTITY |
1 |
| BQDM |
HOLE TYPE |
DRILLED |
| MATT |
MATERIAL |
STEEL COMP 1013 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1016 OVERALL OR STEEL COMP 1017 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1019 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1021 OVERALL OR STEEL COMP 1022 OVERALL OR STEEL COMP 1 |
| CQBC |
MINIMUM TENSILE STRENGTH |
150000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE AND 8 GRADE |
| AATB |
WIDTH BETWEEN FLATS |
0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81348-FF-S-85 GOVERNMENT SPECIFICATION |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
ZINC OVERALL AND CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.776 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
13 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
