| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 80205 | 3 | 2 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 7851 | 5 | 2 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 50568 | 5 | 2 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 28977 | 5 | 2 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 30485 | 5 | 2 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 58998 | 5 | 2 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 53606 | 5 | 2 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 73197 | 5 | 2 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 92215 | 5 | 2 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 80539 | 5 | 2 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | L4528 | 5 | 2 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 4348 | 5 | 9 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 8938 | 5 | 9 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 30902 | 5 | 9 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 56878 | 5 | 9 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 71563 | 5 | 9 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 82172 | 5 | 9 | 5 | ||||
| NAS1012-21 | NATIONAL AEROSPACE STANDARDS | 97928 | 5 | 9 | 5 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.177 INCHES MINIMUM AND 2.197 INCHES MAXIMUM FIRST HOLE |
| AASB | FASTENER LENGTH | 2.486 INCHES MINIMUM AND 2.516 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.390 INCHES MINIMUM AND 0.422 INCHES MAXIMUM |
| AASK | HEAD STYLE | HEXAGON |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH |
| AHYM | NOMINAL THREAD DIAMETER | 0.750 INCHES |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AATB | WIDTH BETWEEN FLATS | 1.053 INCHES MINIMUM AND 1.064 INCHES MAXIMUM |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1012 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.159 INCHES MINIMUM AND 1.219 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 16 |
