| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
2.406 INCHES MINIMUM AND 2.500 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| AAUB |
HOLE DIAMETER |
0.094 INCHES NOMINAL |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| ASXK |
HOLE QUANTITY |
1 |
| BQDM |
HOLE TYPE |
DRILLED |
| MATT |
MATERIAL |
STEEL COMP 1013 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1016 OVERALL OR STEEL COMP 1017 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1019 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1021 OVERALL OR STEEL COMP 1022 OVERALL OR STEEL COMP 1 |
| CQBC |
MINIMUM TENSILE STRENGTH |
150000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.625 INCHES |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE AND 8 GRADE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES OVERALL |
| AATB |
WIDTH BETWEEN FLATS |
0.9220 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
ZINC OVERALL AND CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
1.500 INCHES MINIMUM AND 1.727 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
11 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
