| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
25.0 ROCKWELL C MINIMUM OVERALL AND 34.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| AAUB |
HOLE DIAMETER |
0.060 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
1 |
| BQDM |
HOLE TYPE |
DRILLED |
| MATT |
MATERIAL |
STEEL COMP 1013 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1016 OVERALL OR STEEL COMP 1017 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1019 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1021 OVERALL OR STEEL COMP 1022 OVERALL OR STEEL COMP 1 |
| CQBC |
MINIMUM TENSILE STRENGTH |
120000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE AND 5 GRADE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES OVERALL |
| AATB |
WIDTH BETWEEN FLATS |
0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
1.062 INCHES MINIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
