| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| AAUB |
HOLE DIAMETER |
0.0605 INCHES MINIMUM AND 0.0685 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
1 |
| BQDM |
HOLE TYPE |
DRILLED |
| MATT |
MATERIAL |
STEEL COMP 1013 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1016 OVERALL OR STEEL COMP 1017 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1019 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1021 OVERALL OR STEEL COMP 1022 OVERALL OR STEEL COMP 1 |
| CQBC |
MINIMUM TENSILE STRENGTH |
150000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE AND 8 GRADE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AATB |
WIDTH BETWEEN FLATS |
0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AASK |
|
|
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
ZINC OVERALL AND CHROMATE OVERALL |
| AASA |
THREAD LENGTH |
0.255 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
