| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.105 INCHES MINIMUM FIRST HOLE AND 0.113 INCHES MAXIMUM FIRST HOLE |
| AASB |
FASTENER LENGTH |
3.656 INCHES MINIMUM AND 3.750 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
235.0 BRINELL STANDARD MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| MATT |
MATERIAL |
STEEL COMP 410 OVERALL OR STEEL COMP 416 OVERALL OR STEEL COMP 430 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
70000 POUNDS PER SQUARE INCH |
| CQHQ |
MINIMUM YIELD STRENGTH |
40000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.438 INCHES |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 ASSN STD ALL MATERIAL RESPONSES OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.105 INCHES MINIMUM FIRST HOLE AND 0.113 INCHES MAXIMUM FIRST HOLE |
| AATB |
WIDTH BETWEEN FLATS |
0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
1.126 INCHES MINIMUM AND 1.314 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
14 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
