| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
4.906 INCHES MINIMUM AND 5.000 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
235.0 BRINELL STANDARD MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| AAUB |
HOLE DIAMETER |
0.092 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON LONGITUDINAL HOLE |
| ASXK |
HOLE QUANTITY |
1 |
| BQDM |
HOLE TYPE |
DRILLED |
| MATT |
MATERIAL |
STEEL COMP 403 OVERALL OR STEEL COMP 410 OVERALL OR STEEL COMP 416 OVERALL OR STEEL COMP 420 OVERALL OR STEEL COMP 429 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 440A OVERALL OR STEEL COMP 440B OVERALL OR STEEL COMP 440C OVERALL OR STEEL COMP 440FSE |
| CQBC |
MINIMUM TENSILE STRENGTH |
90000 POUNDS PER SQUARE INCH |
| CQHQ |
MINIMUM YIELD STRENGTH |
40000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.750 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES OVERALL |
| FEAT |
SPECIAL FEATURES |
PROVIDED WITH SNAP RING GROOVE AND GRAPHITE LUBE MIL-L-8937 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AATB |
WIDTH BETWEEN FLATS |
1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
1.750 INCHES MINIMUM AND 1.938 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
