| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
3.406 INCHES MINIMUM AND 3.500 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
25.0 ROCKWELL C MINIMUM OVERALL AND 34.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| AAUB |
HOLE DIAMETER |
0.092 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| ASXK |
HOLE QUANTITY |
1 |
| BQDM |
HOLE TYPE |
DRILLED |
| MATT |
MATERIAL |
STEEL COMP 1013 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1016 OVERALL OR STEEL COMP 1017 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1019 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1021 OVERALL OR STEEL COMP 1022 OVERALL OR STEEL COMP 1 |
| CQBC |
MINIMUM TENSILE STRENGTH |
120000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.750 INCHES |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 5 GRADE AND 10P STYLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES OVERALL |
| AATB |
WIDTH BETWEEN FLATS |
1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
2.000 INCHES MINIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
10 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
