| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.240 INCHES MINIMUM FIRST HOLE AND 2.354 INCHES MAXIMUM FIRST HOLE |
| AASB |
FASTENER LENGTH |
2.406 INCHES MINIMUM AND 2.500 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
33.0 ROCKWELL C MINIMUM OVERALL AND 39.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR ASTM A354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
150000 POUNDS PER SQUARE INCH |
| CQHQ |
MINIMUM YIELD STRENGTH |
130000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.105 INCHES MINIMUM FIRST HOLE AND 0.113 INCHES MAXIMUM FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AATB |
WIDTH BETWEEN FLATS |
0.561 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| AASK |
|
|
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
DOD-P-16232 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE ZINC OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
