| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
5895-01-514-7015, COMMUNICATIONS INTERFACE SYSTEM (CIS) (V) 2 |
| AASB |
FASTENER LENGTH |
2.250 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
25.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.591 INCHES MINIMUM AND 0.627 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| MATT |
MATERIAL |
STEEL COMP 431 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
70000 POUNDS PER SQUARE INCH |
| CQHQ |
MINIMUM YIELD STRENGTH |
30000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.995 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM F 593-02, GROUP 6, MARTENSITIC ALLOYS ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
SCEW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A |
| FEAT |
SPECIAL FEATURES |
SCREW SHALL BE MARKED WITH MANUFACTURE'S SYMBOL MATERIAL MARKING OF F593S SHALL BE RAISED ON OR DEPRESSED IN SCREW HEAD IAW ASTM F 593-02, TABLE 2 SCREW WILL BE HARDENED AND TEMPERED AT 1050 DEG FAHR AS A MINIMUM |
| AATB |
WIDTH BETWEEN FLATS |
0.469 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205 - NAS-35307. DECEMBER 1999 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
SAE AMS 2700B, 02/01/04 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
2.250 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
8 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
