| MRC |
Requirement Statement |
Characteristics |
| CYBH |
BEARING SURFACE OF HEAD SURFACE FINISH |
63.0 MICROINCHES |
| AASB |
FASTENER LENGTH |
1.159 INCHES MINIMUM AND 1.173 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.164 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| CYAW |
SCREW MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5853 ASSN STD SINGLE MATERIAL RESPONSE |
| CYAU |
SCREW MATERIAL |
STEEL CORROSION RESISTING |
| CYBE |
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
-QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| CYBA |
SCREW SURFACE TREATMENT |
PASSIVATE |
| CYBK |
SHANK SURFACE FINISH |
32.0 MICROINCHES |
| CYBL |
THREAD SURFACE FINISH |
32.0 MICROINCHES |
| THSD |
THREAD SERIES DESIGNATOR |
UNJC |
| AATB |
WIDTH BETWEEN FLATS |
0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1802 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.960 INCHES MINIMUM AND 0.992 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
