| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
1520-01-355-8250 |
| AATC |
EXTENDED WASHER DIAMETER |
0.360 INCHES NOMINAL |
| AATD |
EXTENDED WASHER THICKNESS |
0.015 INCHES MINIMUM AND 0.025 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.410 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
38.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM FASTENER |
| AASU |
HEAD HEIGHT |
0.112 INCHES NOMINAL |
| AASK |
HEAD STYLE |
HEXAGON EXTENDED WASHER |
| MATT |
MATERIAL |
STEEL COMP 8740 FASTENER |
| CQBC |
MINIMUM TENSILE STRENGTH |
2000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.1900 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
W/O INTERNAL DRIVE |
| AGSM |
MATERIAL ACCOMMODATED THICKNESS |
0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS6322 OR EQUIV NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE FASTENER |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
SCREW,CAPTIVE |
| FEAT |
SPECIAL FEATURES |
SLEEVE IS MADE OF CRES 304 PER AMS-QQ-S-763,IS NOT RATED FOR HARDNESS AND IS CADMIUM PLATED PER AMS-QQ-P-416 TYPE II, CL 2 |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY II,CL 2 FED STD SINGLE TREATMENT RESPONSE FASTENER |
| SFTT |
SURFACE TREATMENT |
CADMIUM FASTENER |
| AASA |
THREAD LENGTH |
0.250 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
