| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
13.7 MILLIMETERS MINIMUM AND 14.3 MILLIMETERS MAXIMUM |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
2.7 MILLIMETERS MINIMUM AND 3.0 MILLIMETERS MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| MATT |
MATERIAL |
STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
1100 MEGAPASCALS |
| AHYM |
NOMINAL THREAD DIAMETER |
5.8 MILLIMETERS |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
SCREW,HEX HEAD OFFSET CRUCIFORM,ALLOY STEEL,FULL THREAD |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS6382 NATIONAL STD/SPEC 1ST MATERIAL RESPONSE OR AMS6415 OR AMS6484 NATIONAL STD/SPEC 2ND MATERIAL RESPONSE OR AMS6322,AMS6325 OR AMS6327 NATIONAL STD/SPEC 3RD MATERIAL RESPONSE OVERALL |
| AATB |
WIDTH BETWEEN FLATS |
7.85 MILLIMETERS MINIMUM AND 8.00 MILLIMETERS MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NA0114 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CSYM |
SURFACE FINISH |
0.8 MICROMETERS OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS-QQ-P-416,TYPE II, CLASS 2 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
4H6H |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
13.7 MILLIMETERS MINIMUM AND 14.3 MILLIMETERS MAXIMUM |
| CQQR |
THREAD PITCH IN MILLIMETERS |
0.8 |
| THSD |
THREAD SERIES DESIGNATOR |
MJ |
