| MRC |
Requirement Statement |
Characteristics |
| CSYT |
CHAMFER ANGLE |
30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
80.0 ROCKWELL B MINIMUM OVERALL |
| AASL |
HEAD DIAMETER |
0.134 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| AGAV |
III END ITEM IDENTIFICATION |
1015-01-598-4568 |
| MATT |
MATERIAL |
STEEL COMP 316 OR STEEL COMP 316L OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| CQHQ |
MINIMUM YIELD STRENGTH |
30000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.0860 INCHES |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
SCREW,CAP,SOCKET HEAD - HEXAGON,CORROSION RESISTANT STEEL - UNC-3A |
| ABQZ |
INTERNAL DRIVE STYLE |
HEXAGON |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM F593 ASSN STD ALL MATERIAL RESPONSES OVERALL |
| ASDB |
WIDTH ACROSS FLATS |
0.0781 INCHES MINIMUM AND 0.0791 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS-16995 NATIONAL STD/SPEC |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AASA |
THREAD LENGTH |
0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
56 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
