| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
3.170 INCHES MINIMUM FIRST HOLE AND 3.190 INCHES MAXIMUM FIRST HOLE |
| AATC |
EXTENDED WASHER DIAMETER |
1.220 INCHES MINIMUM AND 1.230 INCHES MAXIMUM |
| AATD |
EXTENDED WASHER THICKNESS |
0.168 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
3.485 INCHES MINIMUM AND 3.515 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
2.310 INCHES MINIMUM AND 2.330 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.701 INCHES MINIMUM AND 0.721 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DOUBLE HEXAGON W/HOLE |
| MATT |
MATERIAL |
NICKEL ALLOY OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
150000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.750 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5708 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES MINIMUM FIRST HOLE AND 0.151 INCHES MAXIMUM FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJS |
| AATB |
WIDTH BETWEEN FLATS |
0.808 INCHES MINIMUM AND 0.817 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
1.155 INCHES MINIMUM AND 1.205 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
