| MRC |
Requirement Statement |
Characteristics |
| CRHT |
DISTANCE FROM CENTER OF EYE TO SHANK END |
2.531 INCHES MAXIMUM |
| AATK |
EYE INSIDE DIAMETER |
0.374 INCHES MINIMUM AND 0.377 INCHES MAXIMUM |
| CWXM |
EYE OUTSIDE WIDTH |
0.750 INCHES NOMINAL |
| AAUA |
EYE STOCK THICKNESS |
0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
28.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| MATT |
MATERIAL |
STEEL OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| AATR |
SHANK LENGTH |
1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
2.844 INCHES MINIMUM AND 2.908 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
ONE 0.094 DRILLED HOLE THRU EYE AND 0.375 DIA HOLE AND NO. 6-32 UNC-2B TAPPED HOLE 0.300 DEEP IN FACE AT THREADED END |
| STYL |
STYLE DESIGNATOR |
ROUND, CLOSED |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-STD 171,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE ZINC OVERALL OR PHOSPHATE OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
1.344 INCHES MINIMUM AND 1.406 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
