| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.313 INCHES NOMINAL FIRST HOLE |
| AASB |
FASTENER LENGTH |
1.515 INCHES MINIMUM AND 1.562 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.7481 INCHES MINIMUM AND 0.7488 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.390 INCHES MINIMUM AND 0.422 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR AMS 6300 ASSN STD 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OVE |
| MATT |
MATERIAL |
STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4037 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4140 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.750 INCHES |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES NOMINAL FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AATB |
WIDTH BETWEEN FLATS |
1.053 INCHES MINIMUM AND 1.066 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES THREADS |
| CSYM |
SURFACE FINISH |
250.0 MICROINCHES TOP OF HEAD |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES GRIP |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
1.061 INCHES MINIMUM AND 1.264 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
