| MRC |
Requirement Statement |
Characteristics |
| CRHT |
DISTANCE FROM CENTER OF EYE TO SHANK END |
22.749 INCHES NOMINAL |
| CTWF |
DISTANCE FROM THREADED END TO SHANK HOLE CENTER |
0.500 INCHES NOMINAL FIRST HOLE |
| AATK |
EYE INSIDE DIAMETER |
1.625 INCHES NOMINAL |
| AATZ |
EYE STOCK DIAMETER |
1.500 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
21.0 ROCKWELL C MINIMUM OVERALL AND 28.0 ROCKWELL C MAXIMUM OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-11415-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
100000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
1.500 INCHES |
| AATR |
SHANK LENGTH |
21.250 INCHES NOMINAL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.266 INCHES NOMINAL FIRST HOLE |
| ABHP |
OVERALL LENGTH |
25.062 INCHES NOMINAL |
| STYL |
|
|
| SFTT |
SURFACE TREATMENT |
PHOSPHATE OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
8.000 INCHES MINIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
6 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
