| MRC |
Requirement Statement |
Characteristics |
| CRHT |
DISTANCE FROM CENTER OF EYE TO SHANK END |
1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM |
| CTWF |
DISTANCE FROM THREADED END TO SHANK HOLE CENTER |
1.302 INCHES MINIMUM FIRST HOLE AND 1.322 INCHES MAXIMUM FIRST HOLE |
| AATK |
EYE INSIDE DIAMETER |
0.312 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| CWXM |
EYE OUTSIDE WIDTH |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AAUA |
EYE STOCK THICKNESS |
0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| MATT |
MATERIAL |
STEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| AATR |
SHANK LENGTH |
0.834 INCHES MINIMUM AND 0.854 INCHES MAXIMUM |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.066 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| AAVH |
SHOULDER DIAMETER |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AATP |
SHOULDER THICKNESS |
0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.583 INCHES MINIMUM AND 1.603 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| STYL |
STYLE DESIGNATOR |
ROUND, CLOSED W/SHOULDER |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.469 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
