| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.709 INCHES NOMINAL FIRST HOLE |
| AASB |
FASTENER LENGTH |
1.892 INCHES NOMINAL |
| AAUR |
GRIP DIAMETER |
0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.428 INCHES MINIMUM AND 1.448 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| MATT |
MATERIAL |
IRON ALLOY 660 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5853 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT,TENSION,HEX HEAD,CLOSE TOLERANCE,A286 CRES,SHORT THREAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2.CLASS 2 FED STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.454 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
