| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
B-1B CMUP JJI |
| AASB |
FASTENER LENGTH |
1.308 INCHES NOMINAL |
| AAUR |
GRIP DIAMETER |
0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.938 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON CORNERS |
| AAUB |
HOLE DIAMETER |
0.051 INCHES NOMINAL |
| ASXK |
HOLE QUANTITY |
2 |
| BQDM |
HOLE TYPE |
DRILLED |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 8740 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT,TENSION,HEX HEAD,CLOSE TOLERANCE,ALLOY STEEL,SHORT THREAD,REDUCED MAJOR THREAD DIA.,NONLOCKING,160 KSI FTU |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS6204 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.345 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
