| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
3.131 INCHES NOMINAL FIRST HOLE |
| AASB |
FASTENER LENGTH |
3.270 INCHES NOMINAL |
| AAUR |
GRIP DIAMETER |
0.998 INCHES MINIMUM AND 0.999 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
2.500 INCHES NOMINAL |
| AASU |
HEAD HEIGHT |
0.500 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| MATT |
MATERIAL |
STEEL COMP 8740 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
1.000 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS6322 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR AMS6382 ASSN STD 2ND MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS6415 ASSN STD 3RD MATERIAL RESPONSE OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES MINIMUM FIRST HOLE AND 0.151 INCHES MAXIMUM FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
1.660 INCHES NOMINAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1116 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TYII, CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.770 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
12 |
