| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.306 INCHES NOMINAL FIRST HOLE |
| AASB |
FASTENER LENGTH |
0.455 INCHES MINIMUM AND 0.485 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON CORNERS |
| AAUB |
HOLE DIAMETER |
0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
3 |
| BQDM |
HOLE TYPE |
DRILLED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
NAVY SPECIAL PROJECT |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TYPE II. CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.345 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
