| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
2.518 INCHES MINIMUM AND 2.563 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
95000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5853 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT, HEX HEAD, 95 KSI SHEAR, SHORT THREAD, A286, NONLOCKING |
| FEAT |
SPECIAL FEATURES |
DRILLED SHANK WITH NOMINAL HOLE DIAMETER OF 0.106 INCHES CENTERED 0.216 INCHES FROM THREADED END |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2700, TYPE 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL OR AMS 2700, TYPE 8 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.465 INCHES MINIMUM AND 0.475 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
