| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
1.377 INCHES MINIMUM AND 1.407 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON CORNERS |
| AAUB |
HOLE DIAMETER |
0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
3 |
| BQDM |
HOLE TYPE |
DRILLED |
| MATT |
MATERIAL |
IRON ALLOY 660 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.454 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
