| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
T38 AIRCRAFT |
| AASB |
FASTENER LENGTH |
1.049 INCHES MINIMUM AND 1.079 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.611 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| CRHC |
HOLE CONFIGURATION STYLE |
DOUBLE HEXAGON FLATS |
| AAUB |
HOLE DIAMETER |
0.07 INCHES MINIMUM AND 0.08 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
3 |
| BQDM |
HOLE TYPE |
DRILLED |
| MATT |
MATERIAL |
IRON ALLOY 660 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.3125 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5853 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS2700, METHOD 1, TYPE 2 OR TYPE 8, CLASS 1 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.438 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
