| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
A10 AIRCRAFT WING ASSY |
| AATC |
EXTENDED WASHER DIAMETER |
0.928 INCHES MINIMUM AND 0.938 INCHES MAXIMUM |
| AATD |
EXTENDED WASHER THICKNESS |
0.610 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
2.289 INCHES NOMINAL |
| AAUR |
GRIP DIAMETER |
0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.437 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.557 INCHES NOMINAL |
| AASK |
HEAD STYLE |
DOUBLE HEXAGON W/HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
39200 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.562 INCHES |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT,TENSION,STEEL,EXTERNAL WRENCHING,FLANGED,12-POINT |
| FEAT |
SPECIAL FEATURES |
DOUBLE SHEAR STRENGTH AT 53700 LBS |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.625 INCHES NOMINAL |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY II,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.852 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
